? epcos ag 2005. reproduction, publication and dissemination of this data sheet, enclosures hereto and the information contained therein without epcos prior express consent is prohibited. saw components saw rf filter td-scdma series/type: ordering code: B9030 b39202B9030k310 date: version: march 16, 2006 2.0
2 march 16, 2006 B9030 2017.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet application n low-loss rf filter for mobile telephone td-scdma systems n impedance transformation from 50 w to 200 w n unbalanced to balanced operation n low amplitude ripple n no matching network required n usable passband 15 mhz n suitable for gprs class 1 to 12 features n package size 2.0 x1.6 x 0.68 mm 3 n package code dcs6t n rohs compatible n approximate weight 0.012 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) pin configuration n 2 input unbalanced n 4,6 output balanced n 1,3,5 to be grounded 4 6 2 1,3,5
3 march 16, 2006 B9030 2017.50 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics operating temperature range: t = C25 ?c to +55 ?c terminating source impedance: z s =50 w terminating load impedance: z l = 200 w min. typ. @ 25 ?c max. center frequency f c 2017.5 mhz maximum insertion attenuation a max 2010.0 ... 2025.0 mhz 2.1 2.8 1) 1) 3.2 db max. at C30 ?c ... 85 ?c db amplitude ripple (p-p) da 2010.0 ... 2025.0 mhz 0.3 1.0 2) 2) 1.4 db max. at C30 ?c ... 85 ?c db input vswr 2010.0 ... 2025.0 mhz 1.8 2.1 output vswr 2010.0 ... 2025.0 mhz 1.7 2.0 group delay ripple (p-p) 2010.0 ... 2025.0 mhz 310 ns output amplitude balance (|s 31 /s 21 |) 2010.0 ... 2025.0 mhz C1.5 -1.1/-0.5 0.0 db output phase balance ( f (s 31 ) C f (s 21 )+180?) 2010.0 ... 2025.0 mhz C2.0 1.0/2.5 5.0 ? attenuation a 0.0 ... 1840.0 mhz 50 53 db 1840.0 ... 1970.0 mhz 22 25 db 1970.0 ... 1980.0 mhz 15 21 db 1980.0 ... 1990.0 mhz 7 11 db 2045.0 ... 2085.0 mhz 11 3) 3) 7 db attenuation at -30 ?c ... 85 ?c 14 db 2085.0 ... 2120.0 mhz 22 24 db 2120.0 ... 2160.0 mhz 30 34 db 2160.0 ... 2300.0 mhz 36 40 db 2300.0 ... 3000.0 mhz 42 45 db 3000.0 ... 6000.0 mhz 42 62 db
4 march 16, 2006 B9030 2017.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses source power p s 7 dbm continuous wave
5 march 16, 2006 B9030 2017.50 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
6 march 16, 2006 B9030 2017.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw rf filter data sheet output phase balance ( f (s 31 )- f (s 21 )+180 o , measurement ) output amplitude balance (|s 31 /s 21 |, measurement) output phase balance ( f (s 31 )- f (s 21 )+180 o , measurement )
7 march 16, 2006 B9030 2017.50 mhz saw components saw rf filter data sheet please read cautions and warnings and important notes at the end of this document. references type B9030 ordering code b39202B9030k310 marking and package c61157-a7-a128 packaging f61074-v8152-z000 date codes l_1126 s-parameters B9030_nb.s3p B9030_wb.s3p soldering profile s_6001 for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag surface acoustic wave components division p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2006. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
8 march 16, 2006 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incum- bent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of passive electronic compo- nents or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer appli- cations in which the malfunction or failure of a passive electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of a passive electronic compo- nent. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be avail- able. 6. unless otherwise agreed in individual contracts, all orders are subject to the current ver- sion of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, ceradiode, cssp, phasecap, phasemod, sifi, sikorel, silver- cap, simid, siov, sip5d, sip5k, topcap, ultracap, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
